Amazing, dramatic photos of the hood without its packaging are also available.

All of the photos below were taken by Steve Munk on September 19, 2000.

Rear of hood, passenger side on top. Note that while the passenger's side is parallel to the wall, the driver's side (along the floor) should also be parallel to the wall but is badly bent outward.

Detail of bent rear passenger side corner. Please note how it is folded over at a 90 degree angle.

Another detail of the rear passenger side corner. A three inch section of the cardboard has been pierced, exposing the hood.

Close-up view of the crease in the hood. The crease appears to extend from the passenger side rear nearly to the middle of the driver side. Driver side is well bent.

Front of the hood nearest the camera, passenger side on top. Note again the scary angle the driver's side on the floor takes away from the wall where it should be parallel to the top.

Detail of the front passenger side corner. Cardboard was ripped away in shipping, bent corner can be seen through the hole.

Amazing, dramatic photos of the hood without its packaging are also available.

Questions or comments may be directed to Steve Munk at stevemunk71@gmail.com.